When ScotchBlue Tape invited me to take part in their D.I.Y. creative challenge, I was both honored and flattered but I’ll be honest here: my mind when blank when it came to dreaming up a project. I’m used to spending my days designing behind the computer but feel like a fish out of water when it comes to handcrafting most things — luckily, this is Joey’s strong suit! He started his own line of skateboards last year and we’d often talked about collaborating on a design but it was one of those projects we never seemed to get around to. We quickly realized that this was our chance to finally make it a reality!
To get started, I built out some inspiration boards to give Joey and idea of the direction I wanted my design to take. Pinterest is great but I thought it would be WAY more fun to curate my ideas on cork boards. I knew I wanted the design to be geometric, have at least one pop of color and include my old standbys, type and stripes.
These are the supplies that are needed:
• Blank Skate Deck. Joey carved mine himself (see above) out of reclaimed wood from a furniture shop that was 9 ply but you can pick up a blank deck at most skate shops.
• Print-outs of Design. We printed out my design in three 11×17 inch sheets (black and white is fine on normal paper) that were then taped together as a stencil.
• ScotchBlue Tape. The thinner width was especially awesome for knocking out our stripes.
• Spray Adhesive: You’ll need this to affix the paper stencil to the tape. We used a 3M version.
• Spraypaint. We used Krylon brand with a gloss finish in black, white and yellow (see above) and finished with a clear coat to seal it.
• X-acto Knife. You’ll need to cut out the pattern so you can spray paint the design.
• Prep: Joey cut this deck out with a jigsaw himself, measured and drilled the holes for trucks and sanded it to a smooth finish. If you purchase one from a skate shop, the holes will already be drilled.
1. Start with a base coat of spraypaint (we used white) and let it dry for a full day to make sure it isn’t tacky.
2. Cover the entire bottom surface of the skate deck in ScotchBlue Painter’s Tape.
3. This is the surface that the stencil will be cut out of.
4. Cover the entire taped surface of the skate deck in spray adhesive.
5. Next, affix the stencil to the tacky surface and cut off the excess.
6. Cut out the black portions of the stencil using an X-acto knife. Remember to cut through both the stencil AND the painter’s tape. The stencil and tape are affixed together so peel both off to reveal the painted surface.
7. All black portions of the stencil should be removed EXCEPT for the A.
8. The first coat of black spraypaint is applied. The A was masked over with ScotchBlue Tape because we were going to apply a different color to it later in the process.
9. Remove the rest of the stencil.
10. This is the result.
11. Peel off the A section of the stencil and SAVE IT!
12. Create a fresh, inverted circle stencil.
13. Use paper and ScotchBlue Tape to mask the entire skate deck with exception of the circle and a single stripe (these are the areas we want to make yellow).
14. Spraypaint the yellow sections. Let this dry for a few hours to ensure nice, crisp edges.
15. Remove all paper and tape to reveal the yellow. Then, replace with the A that was set aside earlier. Mask off everything that should NOT be black. Apply one final coat of black paint and let this dry for a few hours.
16. Once surface is dry, remove all masking to reveal your final design!
Joey wasn’t quite finished yet, though. Before I took my deck out for a spin, he applied grip tape to the surface and sliced out my trademark cross symbol. The perfect finishing touch! Get creative here — you can cut out anything in the grip tape you can dream up!
I loved my finished design so much I put it on display in my office. Nothing beats a piece of functional art! If you have any questions at all about the process, please let me know in the comments and we’ll do our best to respond! And if you make your own skate deck design, let us know — we’d love to see it!
This post is a collaboration with ScotchBlue Painter’s Tape. Visit Scotch Blue Tape on Facebook to learn how to win rad stuff and check out the other participants’ projects in the gallery. All concepts and designs within this post were created in partnership with Joey Maas.